The vacuum oil purifier is really easy to use. This is a fact that everyone recognizes. Adding a new vacuum oil purifier solves the major worries of many engineering bosses and creates good value for corporate profits. However, the common vacuum dew mailing needs Only good maintenance work can play a better performance, so what does the maintenance work include?
1. Check the oil level
One of the daily maintenance work of the vacuum oil purifier is to strictly check the oil level. The oil level of the pump in operation must always be located in the middle of the oil window. When necessary, the pump must be stopped. The oil consumption is high, which generally means that the exhaust filter is blocked and the report must be stopped when refueling in the pump. The editor recommends that you check the oil level at least once a day.
2. Check the anti-reverse oil valve
During the operation of the vacuum oil filter, in order to ensure the normal operation of the pump, the anti-return valve must be kept clean. If the inhaled process gas contains a lot of dust or dirt, it must be installed before the air inlet of the pump. a dust filter. At the same time, the filter should be cleaned at any time to prevent it from being blocked by dust. Cleaning after the blockage will seriously affect the service life of the equipment.
3. Clean the radiator
Just like the computer has been used for a long time and not cleaned, the heat dissipation condition will be poor, and then the operation will be stuck. The vacuum oil filter also needs to clean its radiator regularly. In order to maintain sufficient cooling capacity, it is necessary to maintain cooling. In order to ensure the high cleanliness of the area, the turbo fan cover of the vacuum oil filter can be removed, the dust inside the turbine, etc. can be washed with compressed air, and then the cover can be installed.
